Summary
3 layered, inlay trivets. Made with basswood and walnut and felt from xTool. Made a square in XCS and inserted the Turkey image with the outline and placed it in the middle. Then added the lines. Added an outline square around it. Set the engrave settings for the Turkey and then the settings for the cut. I made 2 bottoms for the backing with basswood. Did the basswood cut first and then the walnut cut. Once cut, i glued the frame on the bottom piece and Put some glue down and inserted a row if the basswood first, then a row of the walnut, till it was filled. I did the same with the walnut piece. I cut out 2 pieces of felt, to put on the back of the bottom to protect the surface.
Production Info
Instruction
Not included
Application scenario
Laser processing
Software
xTool Creative Space
Machine & processing module
55W
Compatible xTool MachineGuidelines for using compatible machines
5W, 20W, 10W, 40W
10W, 20W, 40W
20W
5W, 10W
10W
10W, 20W
55W
5W, 10W, 20W
Material used
xTool 3 mm basswood, 3mm walnut and felt
Difficulty Level
Intermediate
Total time
60 min
Setting
Tags
License
You may access, download, use, reproduce, print this work for personal and noncommercial use only. You have no right to adapt, modify, edit, or create derivative works of this work in any format or manner. You shall not share, sub-license, sell, rent, transfer, distribute, redistribute, promote, market, advertise this work, its derivative work, any object printed with the work or its derivative work, or publish, republish, post, upload, host such work, derivative work or object on other digital platforms, web stores or cloud repositories, for commercial purposes and/or gaining profits.