Summary
These are 3 layer paw print cutouts I made for the holiday season craft markets. I first stain, paint or burn the wood with a torch before cutting. The cut pieces are then assembled on a backer alternating colours to produce the inverted colour scheme on opposite sides. You will need 2 faces for each backer to mirror both sides or you can glue 2 layers and make it single-sided and simply paint or engrave the blank side if you like. The beauty of this project is you can mix and match as many colours as you like! Please enjoy and I look forward to any, and all questions and feedback. Happy Making and Enjoy the Holidays! Xtool D1 Pro 5w 3mm Basswood (you could use a thinner wood) Stain Paint Torch - optional Clearcoat (matte, gloss or satin) wood glue
Production Info
Instruction
Not included
Application scenario
Laser processing
Software
xTool Creative Space
Machine & processing module
5W
Compatible xTool MachineGuidelines for using compatible machines
5W, 10W
55W, 55W, 55W
10W, 10W
20W, 20W
10W, 20W
5W, 10W, 20W
10W, 20W, 40W, 10W, 20W, 40W
55W, 55W
20W, 10W, 40W
Material used
3mm basswood, paint, stain, glue, clearcoat
Difficulty Level
Intermediate
Total time
20 min
Setting
License
This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use.